The Sketch Grid

The Sketch Grid

When a Sketch Plane on page 138is activated, a Sketch Grid is drawn that encompasses all the Sketch entities on the plane.

When a Sketch Plane on page 138is activated, a Sketch Grid is drawn that encompasses all the Sketch entities on the plane. The camera is updated automatically to look at the Sketch Plane. If there are no entities on the plane, the Grid assumes a default size.

The Sketch GridThe Sketch Grid has two icons associated with it. The first is a Look-At icon that you can use to change the camera to look at the Sketch Plane if you perform any camera operations that would change the planes orientation. The second icon is a Stop Sketch icon that deactivates the Sketch and returns you to the select mode.

The Sketch GridThe Grid aids in creating accurate Sketches by precisely snapping to points defined by its spacing. A snap point is indicated by a red rectangle.

The Sketch GridSnap points are available throughout the Sketch Plane – they are not restricted to the visible Grid.

The Sketch GridYou can hide the Grid in two ways:

1 Click the Grid icon at the bottom right of your commandbar.The Sketch Grid

2 Go to the View Tab, and under the “User Interface” drop-down box,uncheck the Sketch grid check box.

The Sketch GridThe Sketch Grids spacing is controlled by the snap bar which appears to the bottom-right of the canvas. If the snap bar is set to 0, the Grid assumes a default spacing value.

When a Sketch Plane on page 138 is activated, a Sketch Grid will be drawn that encompasses all the Sketch entities on the plane. The camera is updated automatically to look at the Sketch Plane. If there are no entities on the plane,

About appstudy

Leave a Reply